AMPO POYAM VALVES manufactures valves following any material specified on ASME B.16.34, such as:
• CARBON STEEL e.g.: WCB, WCC…
• ALLOY STEEL e.g.: WC1, WC6, WC9, C5, C12…
• CARBON STEEL FOR LOW TEMPERATURE e.g.: LCB, LCC…
• AUSTENITIC STAINLESS STEEL e.g.: CF8M, CF8C, CF10, CG8M…
• MARTENSITIC STEEL AND FERRITIC MARTENSITE FOR GENERAL SERVICE AND LOW TEMPERATURE e.g.: CA15, CA6NM…
• SUPERAUSTENITIC ALLOYS e.g.: CN7M, CK3MCuN…
• DUPLEX ALLOYS e.g.: S31803, S32760, A890Gr4A, A890Gr5A, A890Gr6A, CD4MCu…
• NICKEL BASE ALLOYS e.g.: INCOLOY 825, MONEL 400, INCONEL 625, CW-6MC, CW-12MW…
NACE MR0103 or NACE MR0175 compliance is a common requirement in sour service applications. Moreover, AMPO POYAM VALVES’ Lift Plug Valve is commonly used in these applications and is compliant to NACE MR0103 and NACE MR0175 requirements in terms of materials.
‘Same technical features than other lift plug valves and:
– Different materials for the jacket: carbon steel, low temperature carbon steel, austenitic stainless steel, duplex…
– Full Jacket and Half Jacket
– All jacketed lift plug valves with Flanged End or Threaded End Connection option
– Jacket Inlet / Outlet with Drain Connection option